It is necessary to know in detail the recommended tolerances for your vehicle. It is necessary to choose the viscosity that will ensure the ideal operating conditions, depending on the region, season, driving style and age of the vehicle.
mehr Infos...
The viscosity index is an indicator that characterizes the dependence of the oil viscosity on the replacement.
mehr Infos...
The issue regarding the miscibility of oils in most cases occurs when it becomes necessary to refill the oil. It is important to take into account the fact that not only base oils but also additives should be combined. Mineral base oils are mixed without restrictions.
mehr Infos...
Viscosity is the most critical indicator. The vehicle’s instruction manual indicates the recommended viscosity range in accordance with SAE J300.
mehr Infos...
Es darf nur das Frostschutzmittel nachgefüllt werden, welcher vorher eingefüllt wurde.
mehr Infos...
Most modern antifreezes are based on ethylene glycol. For enhanced metal protection, it is supplemented by a set of anti-corrosion and lubricating additives. The set of these additives depends on the materials of which the motor unit is made.
mehr Infos...
This is strictly prohibited. The point is that ethylene glycol has a freezing point of only about -15 °C. Hence, only when diluted with water, it begins to fulfill its function.
mehr Infos...
Select the antifreeze for your vehicle only following the tolerances specified by the manufacturer of your vehicle.
mehr Infos...
Most modern motors are designed for the use of synthetic oils. Moreover, it is strictly contraindicated for a motor prone to leakage, because the liquid state of the lubricant can enhance it, especially in older motor mechanisms. Semi-synthetic and mineral oils are recommended for used vehicles, which were developed for such oils.
mehr Infos...
There are several forms that meet the requirements of the classification of the US Department of Transportation: DOT 3, DOT 4, DOT 5.1, and separately from them DOT 5 and DOT 5.1 / ABS, which differ radically from other categories by composition. FMVSS 116 also requires that DOT 5 fluids should be dark red, while DOT 3, DOT 4 and DOT 5.1 should be from colorless to amber.
mehr Infos...
When purchasing an antifreeze, pay attention to the fact that the product is delivered in transparent cans with good, high-quality plugs. Such containers will help identifying the fluid defects: it is only necessary to look at the bottom of the can in light. If you see the sediment in the can, it’s not worth purchasing the antifreeze.
mehr Infos...
It is recommended to use only special distilled water.
mehr Infos...